NEWS
|
Compressor vehicle refrigerator configuration and its principleCompressor vehicle refrigerator is composed of compressor, condenser, filter dryer, capillary, evaporator and other components. The power comes from the compressor, the filter dryer is used to filter dirt and dry water, the capillary is used to throttle and reduce pressure, and the heat exchanger is the condenser and evaporator. There are three states of matter in the world: gas, solid and liquid. Liquid from liquid to gas, will absorb a lot of heat, referred to as "liquid vaporization heat absorption", compressor refrigerator is the use of liquid vaporization heat absorption to refrigeration. The refrigeration compressor absorbs the low temperature and low pressure gas refrigerant from the evaporator, which becomes the superheated steam of high temperature and high pressure after compression and is discharged into the condenser. The gas refrigerant in the condenser dissipates heat to the surrounding air and becomes a high-pressure liquid. The high pressure liquid flows into the capillary through the filter dryer and becomes the low pressure liquid state. The low-pressure liquid enters the evaporator to vaporize and absorbs the heat of the cooled articles around it, so that the temperature is reduced to the required value; The vaporized gas refrigerant is sucked into the compressor through the return pipe, so that a cycle is completed. The continuous operation of the compressor cold cycle ensures the continuity of the refrigeration process. Compressor refrigerator has become a standard configuration in the northern army in Europe and the army in the Middle East, it has a unique advantage in anti-turbulence, tilt Angle. Compressor car refrigerator is gradually replacing the traditional electronic refrigerator, the domestic market is also in the process of gradual acceptance. |