NEWS
|
What is the reason why the car refrigerator doesn't continue to workThe on-board refrigerator is a very important vehicle equipment for drivers who often drive. It can freeze some fruit drinks and snacks and eat them in their spare time. But sometimes, the car refrigerator breaks down and doesn't work. What should I do? What is the reason why the car refrigerator doesn't work? There are many situations that will cause the on-board refrigerator to not work, which can be checked and repaired in the following ways. The first kind: the power line connection problem of the on-board refrigerator. The power line is connected to the car power supply. If the power line is connected incorrectly, the on-board refrigerator will not work normally. Solution: check whether the power cord connector is connected well, ensure that the plug is inserted in place accurately, and whether there is poor contact, etc. Check whether the operation board is damaged. If there are no faults above, it may be the cause of the operation board and need to be replaced. Second: the power supply voltage of the on-board refrigerator. Usually, the voltage of the on-board refrigerator is 12V or 24V. Check whether the access voltage is correct, and make corresponding adjustment according to the requirements for the starting voltage of the refrigerator in the manual. Third: whether the on-board refrigerator is turned on normally. The on-board refrigerator cannot work in the standby state. Check whether the on-board refrigerator is in the standby state. Press the on / off key to turn it on. When the display panel lights up, it indicates that the on-board refrigerator has been turned on normally. When you hear a slight vibration in the refrigerator box, it indicates that the compressor is working. The fourth kind: whether the insurance of the on-board refrigerator is normal may be that the on-board refrigerator is connected with excessive voltage and the line load is overloaded, and the insurance will be burned. Check whether the fuse is burnt out, unplug the power supply and check whether the fuse is normal. Fifth: check whether the operation board is damaged. If there is no fault above, it may be the cause of the operation board and need to be replaced. |